Things You'll Need
Whiskey half barrel
Water
Scrub brush
Wood soap
Sandpaper
Metal polish
Wood slats
Saw
Brads
Hammer
Wood sealer
Half whiskey barrel planters are a charming addition to your home garden. You can make them into water gardens, koi ponds, fountains or simply use them as regular soil planters. Unfortunately, a whiskey barrel may need a little rebuilding before you use one in your garden. The wood and make is meant to house whiskey and therefore must be altered before you can use it for other purposes. Restoring and rebuilding your half whiskey barrel will keep it from disintegrating in your garden.
Step 1
Moisten the wood. When whiskey barrels do not have whiskey in them they tend to dry out, making the wood slots begin to pull away from one another. This leaves gaps in the seams between the staves of the barrel. Begin by pouring hot water on the outside of the barrel and letting the wood swell for a couple of hours. Once the gaps have closed, fill the barrel with hot water and let it sit for 24 hours.
Video of the Day
Step 2
Clean the wood. Use a scrub brush and wood soap to remove any mildew or dirt from the barrel. Let the wood dry and then sand the outside of the barrel to remove any disintegrating wood.
Step 3
Sand the wood. Let your barrel dry after cleaning and sand the wood to remove any disintegrating parts. Make sure to sand in the direction of the wood grain.
Step 4
Polish the hoops. Use metal polish to clean and polish the hoops around the barrel. This will make the barrel look much newer.
Step 5
Reinforce the inside of the barrel. Saw 1/4-by-1-inch pieces of wood to the height of your half barrel. Hammer the pieces vertically on the inside of the barrel where there are any remaining gaps between the staves. If you are having trouble bending the wood to follow the curve of the barrel, you can moisten the wood slats with a little water so they have some give.
Step 6
Seal the wood. Make sure your barrel is completely dry. Paint an outdoor wood sealer on both the inside and outside of your barrel. Make sure to seal right to the edge of the metal hoops so no moisture can enter the wood. This will prevent your barrel from drying out and splitting as well as disintegrating from moisture or termites.
Video of the Day